Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple, low power consumption. SPO2, PR, and Redisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface. it will automatically power off within 5 seconds if the finger falls out of the probe.
- Accurate & Fast Measurement: Accurately determine your SpO2 (blood oxygen saturation level) and Pulse Rate in very few seconds. The ONLY OLED pulse oximeter that can read and display up to 100% for SpO2 value.
- Sound Alarm Indicator: A smart sound alarm system to monitor your SpO2 and PR situation. If an irregular value (higher or lower value) being detected, it will make an alert to warn you to care for body condition.
- Perfectly Safe and Hygienic: Manufactured according to CE and FDA standards for pulse oximeters used by doctors and other health professionals. Finger rubber uses medical silicone that no causes discomfort and just feel soft when plugging your finger.
- Easy to Read: OLED display has adjustable brightness and offers the clearest and most visible display of results. Waveform and bar graph appears the real-time changes of spO2 and pulse rate directly. Four directions for you to choose the best comfortable angle.
- Mini Fingertip Pulse Oximeter: Very light in weight, and small in volume. High-density ABS material makes firmly. Portable and handy designs are convenient for home health care and outdoor activities. The package also includes Lanyard, AAA Batteries, Carry-Bag.
JUMPER Fingertip Pulse Oximeter is a portable non-invasive, spot-check, oxygen saturation of arterial hemoglobin (SPO2) and pulse rate of adult and pediatric user at home, and hospital (including clinical use in internist/surgery, anesthesia, intensive care, etc). Based on full digital technology, the Finger Pulse Oximeter non-invasively measures the actual content (oxygen saturation) of oxyhemoglobin (HbO2) in arterial blood using the optical transmittance method.
Supporting four-direction display and large-font display, JUMPER pulse oximeter is equipped with a color OLED screen to show measured values, plethysmogram, and bar graphs. Besides, it will automatically shut down 16 seconds later when no signal is detected, effectively saving its energy.
Certainly, it is applicable to a wide range of fields, such as families, hospitals (including operation rooms of the departments of internal medicine and surgery, the department of anesthesiology, the department of pediatrics, and intensive care rooms), oxygen bars, social medical care institutions, and sports & health.
- 1 x JUMPER Fingertip Pulse Oximeter
- 1 x Lanyard
- 1 x User manual
Note: Battery Not Included.
Our Pro Series pulse oximeter with a large-font display accurately determines your SpO2(blood oxygen saturation levels) within +/-2% deviation. Each time you press the Function button, the oximeter will switch to another display mode, and there are 6 display modes totally.
Easy to use
The operation of the product is simple and convenient. When your finger inserts into the Oximeter, your nail surface must be upward. The results may be wrong if you did not plug the finger thoroughly in the Oximeter. Please use medical alcohol to clean the rubber touching the finger inside of Oximeter, and clean the test finger using alcohol before and after each test.
Measurement of SpO2&Pulse Rate
The Pulse bar graph displays corresponding with the user’s pulse beat. The height of the bar graph shows the user’s pulse strength. SpO2: Measurement range: 35%-100%; Pulse Rate: Measure range：25bpm -250 bpm
Two batteries included
Put the two AAA batteries into the battery compartment incorrect polarities. Please note that battery polarities should be correctly installed. Otherwise, damage may be caused to the device. Please put in or remove batteries in the right order, or may cause damage to the device bracket.
With professional technology, the device provides you an accurate measurement.
SpO2 Measurement range: 35%-100% / Accuracy: 70%-100%, ±2%; 35%-69% ,no definition.
Pulse Rate Measure range：25bpm -250 bpm / Accuracy：± 2bpm.
The Oximeter mainly consists of a mainframe, a blood oxygen probe, and two batteries, whose materials are absolutely hypoallergenic. It is totally safe for people to measure.